Chemical pails benefit from a plastic bucket label in-mold that resists corrosive spills. This plastic bucket label in-mold can survive contact with acids and alkalis. The label of a plastic bucket label in-mold remains legible after years of storage.
For hazardous material containers, a plastic bucket label in-mold meets UN certification requirements. The barcode on a plastic bucket label in-mold stays scannable despite smearing. A plastic bucket label in-mold eliminates the risk of label loss due to peeling.
In a warehouse, a plastic bucket label in-mold endures stacking pressure without tearing. The indented text of a plastic bucket label in-mold can be read by touch. Some plastic bucket label in-mold designs include raised letters for blind identification.
When a bucket is re-used, a plastic bucket label in-mold cannot be covered by a new label. This is a disadvantage if the bucket’s contents change. However, many companies prefer a plastic bucket label in-mold for single-use certified containers.
The artwork for a plastic bucket label in-mold must be reversed because the label is applied inside the mold. A test run of a plastic bucket label in-mold confirms color registration. The thickness of a plastic bucket label in-mold is usually 0.1 to 0.2 mm.
Polypropylene buckets with a plastic bucket label in-mold are common in the printing ink industry. The plastic bucket label in-mold does not bubble or delaminate when exposed to thinners. For long-term chemical storage, the plastic bucket label in-mold provides unmatched durability.
Comments (0)