The GD socket rail system is a necessity for home decoration and a tool that is used very frequently in daily life. There are dozens of various GD socket rail systems and sockets needed in the room. Inferior GD socket rail systems will have sparking problems in no time.
The installation height of the GD socket rail system is introduced as follows:
The switches and sockets installed on the bedroom walls should be at a height of 1.2 to 1.4 meters from the ground.
2. The switches and sockets in the living room should be a combination of high and low ones. The installation height of the high switches and sockets is approximately 1.4 meters. The low-lying switch sockets are approximately above the skirting board. Protective covers need to be installed to prevent children from touching the power sockets and avoid danger.
3. The height of kitchen switches and sockets from the ground should be at least 1.4 meters. The position standard is just right, which is convenient for daily kitchen electricity use and will not cause safety accidents due to water.
4. It is hoped that all the switches and sockets in the bathroom are equipped with protective covers to prevent water from wetting them. The distance from the ground should be between 1.4 and 1.8 meters, and the suitable position is around 1.5 meters or 1.6 meters.
5. The installation height of the pull cord switch from the ground should be approximately 2 to 3 meters. The other end of the pull cord switch should not be too far from the switch, at least within 100mm. The pull cord switch should be vertically downward.
GD socket rail system https://www.paiyaele.com/GD-Track-Socket.html
Comments (0)